If you're having an appliance installed — like a new oven, boiler, or bathroom extractor fan — you might hear terms like “fused spur” or “isolator switch” thrown around.

But what do they actually mean? And which one does your home need?

At EPM, we regularly install and upgrade these across Exeter, Exmouth, and South Devon — especially during kitchen and bathroom refurbishments. Here’s how to tell the difference and why they matter.

What Is a Fused Spur?

A fused spur (or switched fused connection unit) is a way to take power from an existing circuit and run it to an appliance — while adding a local fuse for safety.

You'll typically see them used for:

• Boiler connections

• Extractor fans

• Integrated fridges or dishwashers

• Underfloor heating systems

They allow you to isolate and protect the appliance without needing to access the fuse board.

What Is an Isolator Switch?

An isolator switch is designed to cut power quickly and safely to a fixed appliance — usually with a big, easy-to-see switch.

These are common for:

• Cookers

• Showers

• Commercial equipment

• Some aircon or heating systems

They’re usually mounted on the wall or above worktops, and they’re not fused — they rely on the protection already built into your consumer unit.

When Do You Need One vs the Other?

Here’s a quick guide:

If in doubt, the key question is:
➡️ Does this appliance need to be independently isolated or fused for safety?

Do They Need to Be Installed by a Pro?

Absolutely.
Even though the switches themselves look simple, the wiring behind them is part of your home’s fixed electrical system. That means it falls under UK electrical safety regulations (Part P).

At EPM, all our electrical work is carried out by qualified professionals and certified for your peace of mind.

What It Might Cost

Across Devon, typical costs are:

• Fused spur installation (surface mount): £75–£110

• Isolator switch installation or upgrade: £90–£140

• Additional wiring or chasing: Estimate provided after inspection

• Callout and testing (if unsure): £75 for first hour, then £50/hr (Electrical rates)

All prices include parts and certification where needed.

Final Word from EPM

If your installer or electrician is asking about fused spurs or isolators — they’re doing the right thing.

They’re not just a box on the wall — they’re there to keep your home safe and your appliances protected.

And if you’re not sure what you’ve got already, we’ll happily check and advise before anything’s switched on.